Description: 
Spartek has two options for permanently installed Pressure/Temperature probes, the cost effective sapphire gauge or the high data quality quartz gauge. Both of these gauges use digital data transmission and subsurface signal processing to eliminate the effects of noise from signal transmission and maximize the accuracy and stability of the measurement.

For permanent installations, the Spartek gauges are annulus mounted on the production tubing with a special design mount arrangement capable of either internal or external sensing. This configuration is connected to the Wellhead electrical outlet through a monoconductor armored cable strapped to the tubing, thus allowing realtime continuous readout of the reservoir parameters under dynamic well conditions without production shut-in.
Spartek has experience with several cable options. Cable selection is often based on the well characteristics.

• Braided 7/32” armor with a single conductor
• Tube armor with single conductor installed

By connecting the Spartek 6020 digital surface unit to the high pressure wellhead feed-through, real time pressure and temperature can be monitored, recorded and displayed in selectable engineering units

Primary Features  
• Operating range +4 Deg C to +170 Deg C
• H2S and CO2 corrosive resistance
• Pressure resolution .0002% F.S.
• Pressure accuracy .02% F.S.
• Integral temperature sensor
• All welded pressure housing with Autoclave pressure   fittings
• Long term stability